Aqua Mix Sealer’s Choice® Gold – Rapid Cure 946mL

Name: Aqua Mix Sealer’s Choice® Gold – Rapid Cure 946mL
Brand: Aqua Mix
Price: 117.00 AUD
Availability: InStock

$117.00

Sale Sold out

AUD

Taxes included.

Description

Sealer’s Choice® Gold – Rapid Cure is a premium grade, high performance penetrating / impregnating stone, tile & grout sealer. It is a low VOC, water-based sealer formulated to provide maximum stain protection, especially in food preparation and serving areas. Ideal for all interior and exterior natural stone (including around salt water swimming pools), tile & grout surfaces. This premium sealer also includes built-in Microban® – Cured Sealant is Mould & Mildew Resistant, and this sealer lasts up to 15 years.

Key Features

Maximum stain protection
May be used as a pre-grouting sealer
Allows moisture vapour transmission
The NEW Rapid Cure Formula protects in less than 4 hours
Now with built-in Microban® – Cured Sealant is Mould & Mildew Resistant
Safe to use, water-based low VOC formula
Does not alter the slip resistance of the sealed surface
Designed to achieve optimal penetration into dense, low-porosity surfaces
Last up to 15 years

For Use On

As a natural look sealer for all natural stone surfaces (such as sandstone, slate, quartz, marble, limestone, granite, bluestone / basalt) unglazed tiles, polished & unpolished porcelain tiles, clay pavers, polished & unpolished concrete, terrazzo, brick, grout, masonry, encaustic tiles, terracotta and grout. Suitable for both interior and exterior use.

Limitations

Do not allow sealer to come in contact with any non-recommended surface.
If the product is allowed to dry on the surface, a white film may form. If this occurs, scrub with Aqua Mix® NanoScrub® and a white nylon pad.
The sealer will not prevent surface wear or etching from acids or caustic chemicals.

Surface Preparation

The surface should be dry, clean and free of waxes, sealers or finishes. New installations need to be dry 24 hours before application. Protect surrounding surfaces. Test product in an inconspicuous area to ensure desirable results. The Stone, Tile or Grout must be dry prior to applying sealer – the following document explains in detail the definition of the term “dry” as it relates to sealer application. READ MORE

Procedure

Always test a small area first to ensure satisfactory results.
Apply using a pump sprayer, paint pad applicator, lambswool applicator, sponge or brush.
Allow it to penetrate for up to 5 minutes, if the surface is drying within 5 minutes, apply more sealer to keep surface wet for up to 5 minutes.
Wipe surface completely dry using clean, dry cotton, paper or microfiber towels after each application. Ensure no sealer is allowed to dry on the surface.
Porous surfaces may require additional applications.
Conduct a test to see if the surface is completely sealed after 2 hours by applying drops of water on the surface. If it penetrates, an additional application is required.