Available in

Megapoxy PM White 4L PMWH4C
Megapoxy PM White 20L (Pick-Up Only)

Specifications

Type: Adhesive
Colour: Multicoloured, White
Suitable for: Brick, Ceramic, Concrete, Glass, Metal, Steel, Stone, Wood
Use: Indoors, Outdoors

Product details

Gap filling epoxy paste adhesive for civil engineering use.

Megapoxy PM is specially formulated structural non-sag epoxy filling paste and adhesive. This easy to use two-part epoxy sets after mixing to an extremely durable adhesive ideal for bonding natural stone, concrete, steel, timber, glass and masonary. It is easy to use 1:1 mixing make it suitable for onsite applications.

Uses:

Precast concrete articles
Concrete Pipes and Tanks
Grouting bolts
Fibreglass articles
Natural stones
Concrete floors and stairs
Bricks and ceramics
Concrete columns
Metals
In-situ formed concrete

Surface Preparation:

Metals: Should be grit blasted to clean surface. Mechanically abraded and degreased. Wire brushing is not entirely satisfactory and gives minimal adhesion only.

Painted Surfaces: A proprietary brand paint stripper should be used. Concrete - the surface may be either flame cleaned or mechanically abraded.

Processing Data:

Mixing Ratio:1 part resin to 1 part hardener by volume
Mixing: Mix until uniform grey or white
Working Life at 25°C: 45 minutes
Minimum Application temperature: 10°C
Minimum Cure Time: 12 hours at 25°C
Full Cure Time: 4 days at 25°C